Process conditions of Busbar rolling machine Rolling material: copper, aluminum Feed thickness: 6 ~ 16mm Feed width :360mm Finished product thickness: 2.5mm Main technical parameters of the Copper and Aluminum Busbar Rolling Machine: 1. Rolling speed :V≤60m/min;Rolling force: 300 tons 2. Two closed memorial archway (vertical column section size: 250×300mm) Material: ZG35 3. Press down motor: N=11KW 1 set;A spherical worm gear with a center distance of 315 is used for pressing. 4. Press down screw :160×6mm 5. Roll roller diameter*roller surface width 450 mm * 500 mm   material: 9 cr2mo 6. The bearings are FC5678275 7. Upper roll spring balance 8. Main motor: Z4-315-42    N = 315kW   n =750/1600r/min (Xi shan motor) 9. Main speed reducer: ZSY500 (Tyrone) 10. Gear box: A=450mm 11. With universal joint shaft and bracket 12. Guide device and equipment foundation bolts 13. Equipped with a two-roller clamp and three-roller leveling mechanism, with a shovel plate inside the frame Motor: Z4-200-31 N = 55kW N =1000/2000r/min (Xi shan motor) Reducer: NGW type 14. Equipped with pressure gauge and roll seam gauge Hydraulic four-pyramid coiler of Busbar Rolling Machine for CU and AL 2 sets (including 2 sets hydraulic unloading cars) 1. The drum size: 620 x 520 mm Ф (590 ~ 620 Ф Ф), increases and jaw 2. Motor: Z4-250-41  N=110KW   n= 500/1100r/min (Xishan motor) 3 Speed reducer center distance: 750㎜