The story of Transformer oil Duct Sticking Machine At present, the production mode of oil duct processing production lines in various transformer companies is the traditional manual processing mode, that is, firstly, manually sort the oil duct brace to make it meet the processing requirements, then brush rubber on the brace, and then put the oil duct brace into the positioning slot of the slot mold, and press the stuck strut with the compression block for about one minute, and then roll up the stay curtain. The efficiency of the production mode is low, and the quality fluctuation is large; the product quality is greatly affected by manual work, and the field operation environment is messy, which does not meet the needs of modern production. Our company oil duct bonding machine can realize the automatic control of the whole processing process of the oil duct stay curtain, so as to realize the unmanned oil channel processing, and fundamentally solve the fundamental problems such as the low efficiency of the oil duct stay curtain processing, the large fluctuation of the quality, and the large artificial factors affecting the product quality. Equipment composition The equipment includes the following: 1) discharging mechanism, 2) push mechanism, 3) gluing mechanism, 4) mounting mechanism, 5) pressing moving mechanism, 6) auxiliary pressing mechanism, 7) unwinding mechanism, 8) winding mechanism, 9) heating mechanism No Classification Properties A5 model 1 Operating properties Strip feeding Manually put, automatically straighten out the strip 2   Correction yes 3   Length 120-620 4   Width 5-10 5   Thickness 2.5-10 6   Bonding speed 40/min 7   Spacing error(mm) 0.02 8   Glue PVA / white latex 9   Working time 36 10   Gas source requirement 200l/min，≥0.5mpa 11 Mechanical property Device size 2000-850-1650 12   Device weight 420 13   Part surface Anodized + white zinc 14 Electrical Property Power kw 5 15   Voltage 220VAC-single phase